Requirements for Stainless Steel Water Cooler (Floor Standing / Wall-Mounted)
1. WATER INLET
If the water cooler is to be placed near or on same side (not across the room) as the water basin or sink, we can tap the water inlet from under the sink.
However, if there is no sink in the space or room where this water cooler is to be placed, you might want to get your contractor to provide a water point with a THREADED end or an on-off valve like that circled in green:
2. ELECTRICAL SOCKET
Electrical socket (if the electrical socket is lower than the body of the water cooler, it is recommended to have waterproof cover)
A standard Singapore socket is required, our appliance is of 230V, 13A.
3. DRAINAGE
A drainage is required. Your contractor could provide us with a constructed open pipe like that:
Or if there is available floor trap that is near (within 1m) where it could be accessed with no bends in pipe or hose, it is also ideal.
Some reference pictures after installation:
